Empatica E4 - 7. Faulty States; Alternating LED Fault States; Rapidly Alternating LED Fault States; No LED Light Fault State

28
empaca
©
2015
7. FAULTY STATES
WHAT TO DOWHAT IT MEANS NOTES
Internal clock is wrong and
needs to be synchronized.
-or-
Internal memory is full.
-or-
Internal memory is in a faulty
state.
Serious hardware problem that
can not be recovered.
Serious hardware problem that
can not be recovered.
The User can solve the issue
by plugging the E4 via USB and
connecng it to the Empaca
Manager.
The device should be returned
for repair following the RMA
procedure outlined in the
Warranty and Support secon
above.
The device should be returned
for repair following the RMA
procedure outlined in the
Warranty and Support secon
above.
Streaming funconality is
sll possible in this condion.
No response from the buon.
No reset is possible.
No response from the buon.
No reset is possible.
alternang
rapidly alternang
No LED light
WHAT YOU SEE
If the device is not responsive or failing to behave as described above aer powering o and let the Empaca Support
team know by emailing support@empaca.com.