Continuum User’s Manual 35
Resetting Parameter Defaults
The Empi Continuum has the ability to modify treatment parameters prior
to treatment application. This allows the clinician to tailor treatment to the
individual patient. When the clinician needs to reset this data due to a new
patient, the following steps are to be applied:
1. Press the ON button to turn on the device.
2. Once the main Options menu is displayed, choose “CONFIG” option.
3. Choose the “CLEAR” option.
4. To reset the waveform data to parameter default values, select the
“PARAMETER” option.
Choosing a Language
The Empi Continuum has the ability to modify the language displayed
upon the LCD screen. The options are English (Default), French, Spanish and
German. When the clinician needs to alter the currently displayed language,
the following steps are to be applied:
1. Press the ON button to turn on the device.
2. Once the main Options menu is displayed, choose “CONFIG” option.
3. Choose the “SETTINGS” option.
4. Use the lower left soft key to scroll to the “Languages” option.
5. Use the right side soft keys to scroll to the proper language.
6. Press the OK button to select the language.
7. Press the Home button.
Product Information (Clinician)
To View the aforementioned Compliance Data, the following steps are to be
applied:
1. Press the ON button to turn on the device.
2. Once the main Options menu is displayed, choose “CONFIG” option.
3. Choose the “data” option (upper right soft key).
4. Use the left side soft keys to scroll through the data.
After scrolling through the data, the clinician can choose to erase (reset) the
data for future collection of compliance data. Compliance Data is captured
in 5 minute increments when the unit is producing output waveforms. When
the Clinician needs to reset this compliance data due to a new patient, follow
the following steps:
1. Press the ON button to turn on the device.
2. Once the main Options menu is displayed, choose “CONFIG” option.
3. Choose the CLEAR option.
4. To clear Compliance data, select “DATA” option.
5. Press the Home button.
To Next Page
Loading...