Page 71
1.3.1 Thermostat R...
04. 07. 2015
10:25
Activation
1.3.2 Tube collector
04. 07. 2015
10:25
Activation
1.3.3 Holiday funct...
04. 07. 2015 10:26
Start
End
19.07.2015
02.08.2015
OPERATION MODE
...the appropriate activation
screen is displayed.
Return to ›1.3 Basic functions‹.
Continue with ›Tube collector‹.
›1.3.3 Holiday funct...‹ appears.
Here, you enter the time of your next
holiday. “Holiday” means that the heating/
warm water plant is not used in summer.
In this case, the controller will adapt
control for the specied period so that
overheating of the plant is prevented.
First select the subitem ›Start‹,
then ›End‹ by pressing ›OK‹.
›1.3.2 Tube collectors‹ appears.
This option is to be activated in case
vacuum tube collectors are used.
Return to ›1.3 Basic functions‹.
Continue with ›Holiday function‹.
To Next Page
Loading...
