emz smart Sol - Page 93

Page 93
1.3.2 Tube collector
04. 07. 2015 10:35
n solar 1
t solar 2
n solar 2
t start
t end
100%
0s
30%
06:00
20:00
1.3.3 Holiday function
04. 07. 2015 10:35
Start
End
19.07.2015
02.08.2015
1.3.3 Holiday function
04. 07. 2015 10:35
Tank cooling
Start
End
Re-cooling
00:00
07:00
T min. tank
PROFESSIONAL MODE
... the pump delivery rate as a
percentage value can be entered.
The two time programs are
performed one after the other.
Continue via the menu item
›Holiday function‹.
If tank cooling is activated, an appropriate
time frame must be dened - this makes
sense during the cooler hours of the night
- by allowing the controller to dissipate as
much energy as possible via the collectors.
Under ›Recooling‹, determine whether
cooling is to be effected down to
›T min tank‹ or ›T max tank‹.
Continue to scroll.
To avoid overheating of the plant, the
controller will suppress yield optimization
while the holiday function is activated.
The time frame of the holiday function
is mostly dened in operation mode.
Continue to scroll.