Enapter Electrolyser - ADDITIONAL SAFETY FOR THE ELECTROLYSER

VERSION
DOCUMENT TITLE
RELEASE DATE
03
EL – Owner’s Manual
2022-04-29
EL – Owner’s Manual – Rev.04 – April 2022 9
This is a draft manual, technical specifications are subject to change
2.3 ADDITIONAL SAFETY FOR THE ELECTROLYSER
The following rules should always be observed. It is the operator’s responsibility to ensure that every
person, working with the device is following these rules:
1. Do not attach filled tanks or other equipment with pressures higher than the device’s maximum
outlet pressure to the H
2
outlet of the device.
2. Do not provide water which does not meet the minimum purity requirements.
3. Do not provide water with a pressure higher than the maximum allowed pressure.
4. Make sure that the H
2
vent line and the O
2
vent line are never obstructed and never combined.
5. Do not combine the O
2
vent line of the EL4.0 with the O
2
vent line or other pipes of older models.