Enapter Electrolyser - Back Panel

VERSION
DOCUMENT TITLE
RELEASE DATE
03
EL – Owner’s Manual
2022-04-29
EL – Owner’s Manual – Rev.04 – April 2022 6
This is a draft manual, technical specifications are subject to change
1.3 BACK PANEL
EL4.0 air cooled back side
EL4.0 liquid cooled back side
The back panel of the device is used to blow out warm air. The stickers show the device specifications
and serial number details. Please leave at least 30 cm space behind the module to allow for adequate
airflow. Never obstruct the ventilation openings!