Enapter Electrolyser - Appendix V. Error Codes

VERSION
DOCUMENT TITLE
RELEASE DATE
03
EL – Owner’s Manual
2022-04-29
EL – Owner’s Manual – Rev.04 – April 2022 48
This is a draft manual, technical specifications are subject to change
Appendix V. Error Codes
Here you can find a list of all the errors that can be triggered while using the electrolyser. The list covers
all firmware versions.
Check, which firmware is installed on your device and then chose “Modbus TCP Communication
Interface” and then “Warning, Error and Fatal Error Codes” to access all warning and errors. E.g. the
warnings and errors for the firmware version 1.6.1 can be found here.
For the warnings and errors, which can appear while using the dryer, use this list.