Endo Optiks E2 - Labels

2
BEGINNING
Labels
The following labels are affixed to the E2 Microprobe¥ system. The title, the part
number, and the location on the E2 Microprobe¥ are given for each label.
Label
Location
Identification
P/N 3840406
Rear Panel, near the top right corner.
Meaning: Type BF equipment
Protection Against Electric Shock
P/N L1012
Incorporated into the Identification
label
Supply Rating
115/240 Volts, 60/50Hz, 6.0/3.0A
Use 2 Type T6.3A, 250V
Fuse Replacement Label
P/N 0711111
Rear Panel, directly below AC
receptacle
Meaning: Dangerous Voltage
P/N L1007
Incorporated into the Identification
label