Endress+Hauser Cubemass DCI - Material; Material Load Diagram

Cubemass DCI
Endress+Hauser 27
Material Transmitter housing
• Compact version
– Aluminum housing: powder-coated die-cast aluminum
• Remote version
– Wall-mount housing: powder coated die-cast aluminum
– Field housing: powder-coated die-cast aluminum
Sensor connection housing (remote version)
• Powder-coated die-cast aluminum
Sensor housing / secondary containment
• Acid-resistant and alkali-resistant external surface, stainless steel 1.4301/304
Seals for mounting set
•Viton
• EPDM
• Silicone
•Kalrez
Material load diagram
#
Warning!
The following load curves relate to the entire measuring device and not just to the process connection.
Flange connections according to EN 1092-1 (DIN 2501) (mounting kit)
Wetted parts (flange, measuring tube): 1.4539/904L
Loose flanges (not wetted): 1.4404/316L
A0012140
Flange connections as per ASME B16.5 (mounting kit)
Wetted parts (flange, measuring tube): 1.4539/904L
Loose flanges (not wetted): 1.4404/316L
A0012141
PN40
20
30
40
50
[bar]
-60
-40
-20
020
40 60 80 100 120 140
180
200
160
[°C]
-40
0
-80
40 80 120 160 200 240 280 320 360 400
[°F]
300
400
500
700
[psi]
600
Class 300
Class 150
0
10
20
30
40
50
[bar]
-60
-40
-20
020
40 60 80 100 120 140
180
200
160
[°C]
-40
0
-80
40 80 120 160 200 240 280 320 360 400
[°F]
[psi]
300
400
500
700
600
200
100
0