Endress+Hauser Cubemass DCI - Measuring System

Cubemass DCI
4 Endress+Hauser
Measuring system The measuring system consists of a transmitter and a sensor. Two versions are available:
• Compact version: transmitter and sensor form a mechanical unit.
• Remote version: transmitter and sensor are mounted physically separate from one another.
Transmitter
Sensor
A0003672
• Four-line liquid crystal display
• Configuration via Touch Control, HART, MODBUS RS485, FieldCare
• Application-specific Quick Setup
• Mass flow, volume flow, density and temperature measurement as well as
calculated variables (e.g. fluid concentrations)
A0011878
• Universal sensor for fluid temperatures up to 200 °C.
• Nominal diameters DN 1 to 6
• Tube material: stainless steel
Esc
E
+
–