Endress+Hauser Deltapilot M FMB50 - Page 125

Cerabar M, Deltabar M, Deltapilot M / 4...20 mA HART Appendix
Endress+Hauser 125
10.2.5 Application
Expert È Application (Cerabar M and Deltapilot M)
HART input unit (156)
Selection
Select the HART input value.
Options:
•Unknown
• mbar, bar
• mmH2O, ftH2O, inH2O
• Pa, hPa, kPa, MPa
•psi
• mmHg, inHg
•Torr
•g/cm
2
, kg/cm
2
•lb/ft
2
•atm
• °C, °F, K, R
Factory setting:
Unknown
HART input form. (157)
Selection
Specify the format for displaying the HART input value.
Options:
• x.x (default)
•x.xx
•x.xxx
• x.xxxx
• x.xxxxx
Factory setting:
x.x
Parameter name Description
Electr. delta P (158)
Entry
For switching the electr. delta P application on or off with an external or constant value.
Options:
Off
External value
Constant
Factory setting:
Off
Fixed ext. value (174)
Entry
Use this function to enter the constant value.
The value refers to "HART input unit".
Factory setting:
0.0
Parameter name Description