DTT31, DTT35
Endress+Hauser 17
Flowphant
®
T DTT35
product structure
This information provides an overview of the order options available. The information is not exhaustive,
however, and may not be fully up to date. More detailed information is available from your local
Endress+Hauser representative.
Flowphant
®
T DTT35
Flow switch, intelligent, programmable. Sensor: calorimetric measurement method. Hygienic applications. 3-A 74-03 compliant (depends
on the selected process connection).
Pos. 010 Approval:
A Non-hazardous area
Pos. 020 Electrical connection:
1 Plug M12x1
2 Plug M16x1.5, ISO4400
3 Plug NPT ½", ISO4400
Pos. 030 Power supply; Output:
A 18 up to 30 V DC; 1 x switch PNP
B 18 up to 30 V DC; 2 x switch PNP
C 18 up to 30 V DC; switch PNP + 4 up to 20 mA
Pos. 040 Display:
1 Digital
Pos. 050 Application; Measuring range:
1 Liquid, -20 up to +85 °C (-4 up to+185 °F), 0 up to 3 m/s (0 up to 9.84 ft/s)
Pos. 060 Adjustment:
1 on site
Pos. 070 Process connection:
DB Clamp ISO2852 DN25-38, 1-1½", 316L, 3A, DIN32676 DN25-40
DL Clamp ISO2852 DN40-51, 2", 316L, 3A, DIN32676 DN50
HL APV-Inline DN50 PN40, 316L, 3A
LB Varivent F DN25-32, PN40, 316L, 3A
LL Varivent N DN40-162, PN40, 316L, 3A
MB Conical metal-metal G ½", 316L
PG DIN11851, DN25 PN40, 316L, 3A
PH DIN11851, DN40 PN40, 316L, 3A
PL DIN11851, DN50 PN40, 316L, 3A
Pos. 080 Insertion length L; Diameter D:
2A L = 30 mm (1.18 in); D = 6 mm (0.24 in)
2B L = 50 mm (1.97 in); D = 6 mm (0.24 in)
2C L = 100 mm (3.94 in); D = 6 mm (0.24 in)
Pos. 090 Additional option; Material certificate:
A Basic version; not needed
B Basic version; material EN10204-3.1
C Basic version; material + roughness EN10204-3.1
Pos. 100 Version:
A Standard, Documentation German
B Standard, Documentation English
C Standard, Documentation French
D Standard, Documentation Japanese
Pos. 995 Marking:
A Tagging (TAG), metal
B Tagging (TAG), on device
C Commissioning label, paper
D Tagging (TAG), Fieldbus
F Tagging (TAG), by customer
DTT35- A 1 1 1 Order code
To Next Page
Loading...
