Endress+Hauser Flowphant T DTT31 - Ordering Information

DTT31, DTT35
16 Endress+Hauser
Ordering information
Flowphant
®
T DTT31
Product structure
This information provides an overview of the order options available. The information is not exhaustive,
however, and may not be fully up to date. More detailed information is available from your local
Endress+Hauser representative.
Flowphant
®
T DTT31
Flow switch, intelligent, programmable. Sensor: calorimetric measurement method
Pos. 010 Approval:
A Non-hazardous areas
Pos. 020 Electrical connection:
1 Plug M12x1
2 Plug M16x1.5, ISO4400
3 Plug NPT ½", ISO4400
Pos. 030 Power supply; Output:
A 18 up to 30 V DC; 1 x switch PNP
B 18 up to 30 V DC; 2 x switch PNP
C 18 up to 30 V DC; switch PNP + 4 up to 20 mA
Pos. 040 Display:
1 Digital
Pos. 050 Application; Measuring range:
1 Liquid, -20 up to +85 °C (-4 up to +185 °F), 0 up to 3 m/s (0 up to 9.84 ft/s)
Pos. 060 Adjustment:
1 on site
Pos. 070 Process connection:
AA w/o; Compr. fitting, 316L, L ≥ 100 mm (3.94 in) insertion length; Compr. fitting, to order
separately
AB Thread ISO228 G¼", 316L
AE Thread ISO 228 G½", 316L
DA Thread ANSI NPT ¼", 316L
DE Thread ANSI NPT ½", 316L
Pos. 080 Insertion length L; Diameter D:
2A L = 30 mm (1.18 in); D = 6 mm (0.24 in)
2C L = 100 mm (3.94 in); D = 6 mm (0.24 in)
Pos. 090 Additional option; Material certificate:
A Basic version; not needed
B Basic version; material EN10204-3.1
C Basic version; material + roughness EN10204-3.1
Pos. 100 Version:
A Standard, Documentation German
B Standard, Documentation English
C Standard, Documentation French
D Standard, Documentation Japanese
Pos. 995 Marking:
A Tagging (TAG), metal
B Tagging (TAG), on device
C Commissioning label, paper
D Tagging (TAG), Fieldbus
F Tagging (TAG), by customer
DTT31- A 1 1 1  Order code