SD00230F/00/EN/13.11
71133117
Functional safety manual
Gammapilot M FMG60
Radiometric measurement technology
Maximum point level detection
Application
Overfill protection or maximum point level detection of
all types of liquids and bulk solids in tanks, to satisfy the
particular requirements for safety-related systems as per
IEC 61508.
The measuring device meets the following requirements
• Functional safety in accordance with IEC 61508
• Explosion protection (depending on version)
• Electromagnetic compatibility as per EN 61326 and
NAMUR recommendation NE 21
• Electrical safety in accordance with IEC/EN 61010-1
Your benefits
• For overfill protection up to SIL 3
– independently assessed (Functional Safety
Assessment) by TÜV Rheinland in according
to IEC 61508
• Permanent self-monitoring
• Safe parameterization concept
• Mode of operation "Low demand mode" and
"High demand mode"
To Next Page
Need help?
General
