Operation TMT162
18 Endress+Hauser
Fig. 12: HART
®
function matrix
5.3.2 FieldCare
FieldCare is a universally applicable service and configuration software based on FDT/DTM
technology. Connection is established by means of a HART
®
modem, e.g. Commubox FXA191.
Detailed information is provided in the installation instructions of the FieldCare configuration
software (see chapter 'Documentation'). The DTMs available for the device also allow operation by
means of operating programs of other manufacturers that support FDT/DTM technology.
To Next Page
Loading...
