Endress+Hauser iTEMP HART TMT162 - Technical Data; Input

Technical data TMT162
42 Endress+Hauser
10 Technical data
10.0.1 Input
Measured variable Temperature (temperature linear transmission behavior), resistance and voltage.
Measuring range The transmitter monitors different measuring ranges depending on the sensor connection and input
signals.
Type of input
Input Designation Measuring range limits Min. span
Resistance thermometer (RTD)
to IEC 60751
(α = 0.00385)
to JIS C1604-81
(α = 0.003916)
to DIN 43760
(α = 0.006180)
to Edison Copper Winding No. 15
(α = 0.004274)
to SAMA
(α = 0.003923)
to Edison Curve
(α = 0.006720)
to GOST
(α = 0.003911)
to GOST
(α = 0.004278)
Pt100
Pt200
Pt500
Pt1000
Pt100
Ni100
Ni1000
Cu10
Pt100
Ni120
Pt50
Pt100
Cu50, Cu100
Polynomial RTD
Pt100 (Callendar - van Dusen)
-328 to 1562 °F (-200 to 850 °C)
-328 to 1562 °F (-200 to 850 °C)
-328 to 482 °F (-200 to 250 °C)
-328 to 482 °F (-200 to 250 °C)
-328 to 1200 °F (-200 to 649 °C)
-76 to 482 °F (-60 to 250 °C)
-76 to 302 °F (-60 to 150 °C)
-148 to 500 °F (-100 to 260 °C)
-148 to 1292 °F (-100 to 700 °C)
-94 to 518 °F (-70 to 270 °C)
-328 to 2012 °F (-200 to 1100 °C)
-328 to 1562 °F (-200 to 850 °C)
-328 to 392 °F (-200 to 200 °C)
-328 to 1562 °F (-200 to 850 °C)
-328 to 1562 °F (-200 to 850 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
18 °F (10 °C)
• Type of connection: 2-wire, 3-wire or 4-wire connection
• With 2-wire circuit, compensation of wire resistance possible (0 to 30 Ω)
• With 3-wire and 4-wire connection, sensor wire resistance to max. 50 Ω per wire
• Sensor current: ≤ 0.3 mA
Resistance transmitter Resistance Ω 10 to 400 Ω
10 to 2000 Ω
10 Ω
100 Ω