TMT162 Installation
Endress+Hauser 7
2.3 Registered trademarks
•HART
®
Registered trademarks of HART
®
Communication Foundation, Austin, TX, USA
•Microsoft
®
Windows NT
®
, Windows
®
2000 and Windows
®
XP
Registered trademarks of Microsoft Corporation, Redmond, USA
•iTEMP
®
and ReadWin
®
2000
Registered trademarks of Endress+Hauser Wetzer GmbH + Co. KG, Nesselwang, Germany
3 Installation
3.1 Quick installation guide
If the sensor is fixed then the unit can be fitted directly to the sensor. For remote mounting to a wall
or stand pipe, two mounting kits are available (→ Fig. 4). The illuminated display can be mounted
in four different positions (→ Fig. 2):
Fig. 2: Temperature field transmitter with sensor, 4 display positions, can be plugged-in in 90° steps
Pos. A: Sensor
Pos. 1: Cover clamp
Pos. 2: Housing cover with O-ring
Pos. 3: Display with retainer
Pos. 4: Electronics compartment
1. Remove the cover clamp (Pos. 1).
2. Unscrew the housing cover together with the O-ring (Pos. 2).
To Next Page
Loading...
