Identification TMT162
6 Endress+Hauser
2 Identification
2.1 Unit identification
2.1.1 Legend plate
CE Mark, declaration of conformity
4
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which they are safe to operate. The device complies with the applicable
standards and regulations in accordance with IEC 61010 "Protection Measures for Electrical
Equipment for Measurement, Control, Regulation and Laboratory Procedures" and with the EMC
requirements of IEC 61326. The measuring system described in these Operating Instructions
complies with the statutory requirements of the EC Directives. The manufacturer confirms
successful testing of the device by affixing the CE mark.
UL recognized component to UL 3111-1
â
CSA GP approved
GL German Lloyd marine approval
Ó
GL Type Approval for temperature measurements in hazardous locations on GL Classed Vessels,
Marine and Offshore Installations.
2.2 Delivery contents
The scope of delivery of the field transmitter is as follows:
• Temperature field transmitter
•Entry blank
• Mulitlanguage Brief Operating Instructions as hard copy
• Operating instructions on CD-ROM
• Control drawing for use in hazardous areas
!
Note!
Please take note of the field transmitter accessories in chapter 8 "Accessories".
Fig. 1: Example: Field transmitter legend plate
1 Order code and series number of the device
2 Protection and approvals
3 Power supply and output signal
4 Ambient temperature; for Ex area,
see Ex-certification or Control Drawing
5 Approvals with symbols
To Next Page
Loading...
