Endress+Hauser iTEMP TMT82 HART 7 - About this Document; Document Function; Using this Document; Symbols Used

Temperature transmitter iTEMP TMT82 About this document
Endress+Hauser 7
2 About this document
2.1 Document function
This supplementary Safety Manual applies in addition to the Operating Instructions,
Technical Information and ATEX Safety Instructions. The supplementary device
documentation must be observed during installation, commissioning and operation. The
requirements specific to the protection function are described in this safety manual.
General information on functional safety (SIL) is available at:
www.endress.com/SIL
2.2 Using this document
Information on the document structure
For the arrangement of the parameters according to the menu structure of the
Operation menu, Setup menu, Diagnostics menu, along with short descriptions, see
the Operating Instructions for the device
2.3 Symbols used
2.3.1 Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not result in
personal injury.
2.3.2 Symbols for certain types of information and graphics
Tip
Indicates additional information
Reference to documentation
Reference to graphic
Notice or individual step to be observed
1.
,
2.
,
3.
Series of steps
Result of a step
1, 2, 3, ...
Item numbers