Endress+Hauser Levelflex FMP56 - Tolerance of Probe Length; Weight; Material

Levelflex FMP56, FMP57
36 Endress+Hauser
Tolerance of probe length
Rod probes
Over [m (ft)] — 1 (3,3) 3 (9,8) 6 (20)
Up to [m (ft)] 1 (3,3) 3 (9,8) 6 (20) —
Admissible tolerance [mm (in)] -5 (-0,2) -10 (-0,39) -20 (-0,79) -30 (-1,18)
Rope probes
Over [m (ft)] — 1 (3,3) 3 (9,8) 6 (20)
Up to [m (ft)] 1 (3,3) 3 (9,8) 6 (20) —
Admissible tolerance [mm (in)] -10 (-0,39) -20 (-0,79) -30 (-1,18) -40 (-1,57)
Weight
Housing
Part
Weight
Housing GT18 - stainless steel approx. 4.5 kg
Housing GT19 - plastic approx. 1.2 kg
Housing GT20 - aluminium approx. 1.9 kg
FMP56
Part
Weight Part Weight
Sensor approx. 0.8 kg Rope probe 4 mm approx. 0.1 kg/m probe length
Rope probe 6 mm approx. 0.2 kg/m probe length
FMP57
Part
Weight Part Weight
Sensor approx. 1.4 kg + weight of flange Rope probe 6 mm approx. 0.2 kg/m probe length
Rope probe 4 mm approx. 0.1 kg/m probe length Rod probe 16 mm approx. 1.6 kg/m probe length
Material
2.1 1
2.2 5
678
934
A0013788
Housing GT18 - stainless steel, corrosion-resistant
No. Part: material No. Part: material
1 Housing: 316L (CF-3M) 5 Cable entry
• Sealing: EMPB
• Cable gland: polyamide (PA), nickel-plated brass (CuZn)
• Adapter: 316L (1.4435)
2.1 Compartment for the display module
• Cover: 316L (CF-3M)
• Window: glass
• Cover seal: EPDM