Levelflex FMP56, FMP57
Endress+Hauser 49
Accessory Description
Mounting kit, isolated
A0013586
1 Insulating sleeve
2 Eye-bolt
For reliably insulated fixing of the probe.
Maximum process temperature: 150 °C (300 °F)
For rope probes 4 mm (1/6 in):
• Eye-bolt M8 DIN 580
• Diameter D = 20 mm (0.8 in)
• Order-No.: 52014249
For rope probes 6 mm (1/4 in):
• Eye-bolt M10 DIN 580
• Diameter D = 25 mm (1 in)
• Order-No.: 52014250
Due to the risk of electrostatic charge, the insulating sleeve is not suitable for use in
hazardous areas. In these cases the fixing must be reliably grounded.
The mounting kit can also be ordered directly with the device (see the Levelflex
product structure, feature 620 "Accessory Enclosed", option PG "Mounting kit,
isolated, rope").
Communication-specific
accessories
Accessory
Description
Commubox FXA195 HART For intrinsically safe HART communication with FieldCare via the USB interface.
For details refer to Technical Information TI404F/00
Accessory Description
Commubox FXA291 Connects Endress+Hauser field devices with CDI interface (= Endress+Hauser Common
Data Interface) to the USB interface of a computer.
For details refer to Technical Information TI405C/07
Accessory Description
HART Loop Converter
HMX50
Evaluates the dynamic HART variables and converts them to analog current signals or limit
values.
For details refer to Technical Information " TI429F/00 and Operating Instructions
BA371F/00
To Next Page
Loading...
