Endress+Hauser Liquicap M FTI51 - 2.1.3 Ordering Information (FTI52)

Liquicap M FTI51, FTI52 Identification
Endress+Hauser 13
2.1.3 Liquicap M FTI52 (ordering information)
10 Approval:
A Non-hazardous areas
B Non-hazardous areas, WHG (German Water Resources Act)
G ATEX II 1/2 GD EEx de (ia) IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
H ATEX II 1/2 GD EEx ia IIC T6,
XA, observe safety instructions (electrostatic charge)!
J ATEX II 1/2 GD EEx ia IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
K ATEX II 1/2 G EEx ia IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
L ATEX II 1/2 G EEx d (ia) IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
M ATEX II 3GD EEx nA/nL/nC II T6, WHG
XA, observe safety instructions (electrostatic charge)!
N *CSA General Purpose, C US CSA
P CSA/FM IS Cl. I, II, III Div. 1+2 Gr. A–G
R CSA/FM XP Cl. I, II, III Div. 1+2 Gr. A–G
S TIIS Ex ia IIC T3
T TIIS Ex d IIC T3
Y Special version, to be specified
1 NEPSI Ex ia IIC T6
2 NEPSI Ex d(ia) IIC T6
4 NEPSI Ex nA/nC IIC T6
5 IECEx Ga/Gb Ex ia IIC T6; Ex iaD 20/Ex tD A21
6 IECEx Ga/Gb Ex ia IIC T6
20 Inactive length L3:
Price per 100 mm/1 inch
L3: 100 to 2000 mm/4 to 80 inch for 316L
L3: 150 to 1000 mm/6 to 40 inch for PFA fully insulated
Protection against condensate + bypassing container nozzles
A Not selected
1 ... mm, 316L
2 ... mm, 316L + PFA fully insulated
5 ... inch, 316L
6 ... inch, 316L + PFA fully insulated
9 Special version, to be specified
30 Active length L1; insulation:
Price per 1000 mm/10 inch
L1: 420 to 10000 mm/17 to 400 inch; fully insulated
A ... mm, 316; FEP
B ... mm, 316; PFA
C ... inch, 316; FEP
D ... inch, 316; PFA
Y Special version, to be specified
40 Insulation L2
1 Fully insulated
9 Special version, to be specified
50 Process connection:
Threaded connection
GDJ G ¾, 316L, 25 bar Thread ISO228
GEJ G 1, 316L, 25 bar Thread ISO228
GGJ G 1½, 316L, 100 bar Thread ISO228
RDJ NPT ¾, 316L, 25 bar Thread ANSI
REJ NPT 1, 316L, 25 bar Thread ANSI
RGJ NPT 1½, 316L, 100 bar Thread ANSI
Hygiene connection
GWJ G 1 316L, 25 bar, EHEDG Thread ISO228
Accessories installation, welding neck