Endress+Hauser Liquicap M FTI51 - Probe Without Active Buildup Compensation

Liquicap M FTI51, FTI52 Installation
Endress+Hauser 37
3.6 Probe without active buildup compensation
BA300Fen009
GN/YE
YE
RD
1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Strand yellow (YE) with ring terminal and
heatshringking sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal and
heatshringking sleeve
16. Blade plug
17. Tube
18. Process connection
20. Strand black (BK)
(not required)
22. Strand yellow/green (YE/GN)
with a ring terminal
24. Solder the strand
with the central core of the
coaxial cable (probe)
red (RD)
23. Solder the strand
with the screening of the
yellow (YE)
coaxial cable (ground)
19. External screening
(not required)
21. Coaxial cable with
nd
central core
a screening