Endress+Hauser Liquicap M FTI51 - 2.1.2 Ordering Information (FTI51)

Liquicap M FTI51, FTI52 Identification
Endress+Hauser 9
2.1.2 Liquicap M FTI51 (ordering information)
10 Approval:
A Non-hazardous areas
B Non-hazardous areas, WHG (German Water Resources Act)
C ATEX II 1/2 GD EEx ia IIC T6
D ATEX II 1/2 GD EEx ia IIC T6, WHG (German Water Resources Act)
G ATEX II 1/2 GD EEx de (ia) IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
H ATEX II 1/2 GD EEx ia IIC T6,
XA, observe safety instructions (electrostatic charge)!
J ATEX II 1/2 GD EEx ia IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
K ATEX II 1/2 G EEx ia IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
L ATEX II 1/2 G EEx d (ia) IIC T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
M ATEX II 3GD EEx nA/nL/nC II T6, WHG (German Water Resources Act)
XA, observe safety instructions (electrostatic charge)!
N *CSA General Purpose, C US CSA
P CSA/FM IS Cl. I, II, III Div. 1+2 Gr. A–G
R CSA/FM XP Cl. I, II, III Div. 1+2 Gr. A–G
S TIIS Ex ia IIC T3
T TIIS Ex d IIC T3
Y Special version, to be specified
1 NEPSI Ex ia IIC T6
2 NEPSI Ex d(ia) IIC T6
4 NEPSI Ex nA/nC IIC T6
5 IECEx Ga/Gb Ex ia IIC T6; Ex iaD 20/Ex tD A21
6 IECEx Ga/Gb Ex ia IIC T6
20 Inactive length (L3):
L3: 100 to 2000 mm/4 to 80 inch for 316L
L3: 150 to 1000 mm/6 to 40 inch for PTFE fully insulated
Protection against condensate + bypassing container nozzles
A Not selected
B Not selected + 125mm/5inch
Active buildup compensation
316L
C Not selected + 125mm/5inch
Fully insulated active buildup
compensation
PFA, 316L
Price per 100 mm
1 .... mm 316L
2 .... mm 316L, PTFE fully insulated
Price is irrespective of the length
3 .... mm (<= 500 mm)
+ 125 mm active buildup compensation
316L
4 .... mm (> 500 mm)
+ 125 mm active buildup compensation
316L
Price per one inch
5 .... inch 316L
6 .... inch 316L, PTFE fully insulated
Price is irrespective of the length
7 .... inch (<= 20 inch)
+ 5 inch active buildup compensation
316L
8 .... inch (> 20 inch)
+ 5 inch active buildup compensation
316L
9 Special version, to be specified
30 Active probe length (L1); insulation:
Price per 100 mm/1 inch
L1: 100 to 4000 mm/4 to 160 inch for ∅10 mm, ∅16 mm
L1: 150 to 3000 mm/6 to 120 inch for ∅22 mm (fully insulated)
A mm L1, 10 mm, 316L; PTFE
B mm L1, 16 mm, 316L; PTFE
C mm L1, 22 mm, 316L; PTFE
D mm L1, 16 mm, 316L; PFA
1 mm L1, 14 mm, 316L; PFA
E mm L1, 10 mm, 316L; PTFE + ground tube