Liquiline CM442R/CM444R/CM448R Incoming acceptance and product identification
Endress+Hauser 11
3.2.2 Product identification
Product page
www.endress.com/cm442r
www.endress.com/cm444r
www.endress.com/cm448r
Interpreting the order code
The order code and serial number of your product can be found in the following locations:
• On the nameplate
• In the delivery papers
Obtaining information on the product
1. Go to www.endress.com.
2. Call up the site search (magnifying glass).
3. Enter a valid serial number.
4. Search.
The product structure is displayed in a popup window.
5. Click on the product image in the popup window.
A new window (Device Viewer) opens. All of the information relating to your
device is displayed in this window as well as the product documentation.
3.2.3 Manufacturer's address
Endress+Hauser Conducta GmbH+Co. KG
Dieselstraße 24
D-70839 Gerlingen
3.3 Scope of delivery
The scope of delivery comprises:
• 1 multichannel controller in the version ordered
• 1 mounting plate
• 1 external display (if selected as an option)
1)
• 1 DIN rail power unit incl. cable (CM444R and CM448R only)
• 1 printed copy of the Operating Instructions for DIN rail power unit
• 1 printed copy of the Brief Operating Instructions in the language ordered
• Disconnection element (pre-installed on hazardous area version type 2DS Ex-i)
• Terminal strip
‣
If you have any queries:
Please contact your supplier or local sales center.
1) The external display can be selected as an option in the order structure or ordered as an accessory at a later stage.
To Next Page
Loading...
