Endress+Hauser Liquiline CM442R - Mounting the Measuring Device

Liquiline CM442R/CM444R/CM448R Installation
Endress+Hauser 15
4.1.4 Cable length for optional display
Length of display cable provided:
3 m (10 ft)
Maximum permitted length of a display cable:
5 m (16.5 ft)
4.2 Mounting the measuring device
4.2.1 DIN rail mounting
The mounting procedure is the same for all Liquiline devices. The example shows a CM448R.
1. In the order configuration, the securing clips are "tightened" to secure the DIN rail.
Release the securing clips by pulling them downwards.

2. Attach the device from the top to the DIN rail (a) and secure it by pressing down (b).

a
b
3. Slide the securing clips upwards until they click, thereby securing the device to the DIN
rail.

4. CM444R and CM448R only
Mount the external power unit in the same way.