Endress+Hauser Liquiline CM442R - Basic Safety Instructions; Requirements for Personnel; Designated Use

Basic safety instructions Liquiline CM442R/CM444R/CM448R
6 Endress+Hauser
2 Basic safety instructions
2.1 Requirements for personnel
• Installation, commissioning, operation and maintenance of the measuring system may be
carried out only by specially trained technical personnel.
• The technical personnel must be authorized by the plant operator to carry out the specified
activities.
• The electrical connection may be performed only by an electrical technician.
• The technical personnel must have read and understood these Operating Instructions and
must follow the instructions contained therein.
• Faults at the measuring point may only be rectified by authorized and specially trained
personnel.
Repairs not described in the Operating Instructions provided must be carried out only
directly at the manufacturer's site or by the service organization.
2.2 Designated use
2.2.1 Non-hazardous atmosphere
Liquiline CM44xR is a multichannel controller for connecting digital sensors with Memosens
technology in non-hazardous environments.
The device is designed for use in the following applications:
• Food and beverages
• Life science
• Water and wastewater
• Chemical industry
2.2.2 Hazardous environment in accordance with cCSAus Class I Div. 2
‣
Please pay attention to the control drawing and specified operating conditions in the
appendix of the Operating Instructions and follow the instructions.
‣
Pay attention to the control drawing and the specified application conditions in the
appendix of these Operating Instructions, and follow the instructions.
2.2.3 Hazardous environment with transmitter with sensor communication module
type 2DS Ex-i
The installation conditions in these Brief Operating Instructions and the corresponding XA
must be observed.
• ATEX & IECEx: XA02419C
• CSA: XA02420C