Endress+Hauser Liquiline CM442R - Page 13

Liquiline CM442R/CM444R/CM448R Installation
Endress+Hauser 13
The following minimum clearance specifications must be observed:
• Distances at the side in relation to other devices incl. power units and to the wall of the
cabinet:
at least 20 mm (0.79 inch)
• Distance above and below the device and depth distance (to control cabinet door or other
devices installed there):
at least 50 mm (1.97 inch)
min. 50 (1.97)
min. 20 (0.79)
min. 50 (1.97)
min. 20 (0.79)
min. 50 (1.97)
A0039735
 1 Minimum clearance in mm (in)
4.1.2 Wall mounting
83 (3.27) 205.5 (8.09)
75 (2.95)
75 (2.95)
100 (3.94) 100 (3.94)
4 x 4.5 (0.18)! 4 x 4.5 (0.18)!
A0025370
 2 Drilling pattern for wall mounting in mm (in)