Endress+Hauser Liquiphant FTL62 - Product Identification Methods; Storage and Transport Guidelines

Liquiphant FTL62 Mounting
Endress+Hauser 11
5.1.5 Support the device
NOTICE
If the device is supported incorrectly, shocks and vibrations can damage the coated
surface.
‣
Only use a support in conjunction with ECTFE or PFA plastic coating.
‣
Only use suitable supports.
Support the device in the event of severe dynamic load. Maximum lateral loading capacity of
the pipe extensions and sensors: 75 Nm (55 lbf ft).
A0031874
 8 Examples of support in the event of dynamic load
5.2 Mounting the device
5.2.1 Required tool
• Open-ended wrench for securing the flange
• Allen key for housing locking screw