Endress+Hauser Micropilot FMR20 HART - Page 35

Micropilot FMR20 HART
Endress+Hauser 35
Order number
52025686
The sensor is not completely covered in the case of the 40 mm (1.5 in) antenna or the
80 mm (3 in) antenna.
Securing nut G 1-1/2"
Suitable for devices with G 1-1/2" and MNPT 1-1/2" process connection.
G1 1/2" DIN ISO 228
60 mm
10 (0.39)
A0028849
 36 Dimensions of securing nut, engineering unit: mm (in)
Material
PC
Order number
52014146
Securing nut G 2"
Suitable for devices with G 2" and MNPT 2" process connection on front.
10 (0.39)
G 2"
70 mm
A0029101
 37 Dimensions of securing nut, engineering unit: mm (in)
Material
PC
Order number
52000598