Micropilot FMR20 HART
Endress+Hauser 55
Communication-specific
accessories
Commubox FXA195 HART
For intrinsically safe HART communication with FieldCare / DeviceCare via the USB interface.
For details, see Technical Information TI00404F
HART Loop Converter HMX50
Is used to evaluate and convert dynamic HART process variables to analog current signals or limit
values.
Order number: 71063562
For details, see Technical Information TI00429F and Operating Instructions BA00371F
WirelessHART adapter SWA70
Is used for the wireless connection of field devices.
The WirelessHART adapter can be easily integrated into field devices and existing infrastructures,
offers data protection and transmission safety and can be operated in parallel with other wireless
networks.
For details, see Operating Instructions BA00061S
Service-specific accessories
Applicator
Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum measuring device: e.g. pressure
loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and parameters over the entire
life cycle of a project.
Applicator is available:
https://portal.endress.com/webapp/applicator
Configurator
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as measuring
range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
The Configurator is available on the Endress+Hauser website: www.endress.com -> Click "Corporate"
-> Select your country -> Click "Products" -> Select the product using the filters and the search field ->
Open the product page -> The "Configure" button to the right of the product image opens the Product
Configurator.
DeviceCare SFE100
Configuration tool for HART, PROFIBUS and FOUNDATION Fieldbus field devices
DeviceCare is available for download at www.software-products.endress.com. You need to register in
the Endress+Hauser software portal to download the application.
Technical Information TI01134S
FieldCare SFE500
FDT-based plant asset management tool
It can configure all smart field units in your system and helps you manage them. By using the status
information, it is also a simple but effective way of checking their status and condition.
Technical Information TI00028S
W@M
Life cycle management for your plant
W@M supports you with a wide range of software applications over the entire process: from
planning and procurement, to the installation, commissioning and operation of the measuring
devices. All the relevant device information, such as the device status, spare parts and device-specific
documentation, is available for every device over the entire life cycle.
The application already contains the data of your Endress+Hauser device. Endress+Hauser also takes
care of maintaining and updating the data records.
To Next Page
Loading...
