Endress+Hauser Micropilot FMR20 HART - Page 47

Micropilot FMR20 HART
Endress+Hauser 47
Cantilever (long) with pivot, G 2" sensor process connection on front
1085 (42.7)
300 (11.8)
M8
35 (1.4)
50 (2.0)
20 (0.8)
105 (4.1)
62 (2.4)
22 (0.9)
3 (0.12)
6.5 (0.3)
15 (0.6)
100 (3.9)
25 (1.0)
35 (1.4)
100 (3.9)75 (2.9)
750 (29.5)
20 (0.8)
75 (2.9)
3 (0.12)
A0037805
 52 Dimensions of cantilever (long) with pivot for G 2" sensor process connection on front. Unit of
measurement mm (in)
Weight:
4.4 kg (9.7 lb)
Material
316L (1.4404)
Order number
71452322
• 62 mm (2.44 in) openings for all G 2" (MNPT 2") connections on front
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery
Mounting frame (short) for cantilever with pivot
3.2 (0.13)
20 (0.8)
55 (2.17)
100 (3.94)
25 (0.98)
700 (27.6)
45 (1.77)
76
(2.99)
100
(3.94)
200 (7.87)
13 (0.5)
ø33.7 (1.3)
130 (5.12)
150 (5.91)
100
(3.94)
60 (2.36)
4 (0.16)
6.5 (0.3)
109 (4.29)
75 (2.95)
A0037799
 53 Dimensions of mounting frame (short). Unit of measurement mm (in)