Endress+Hauser Micropilot FMR67 - Page 15

Micropilot FMR67 XA01554F-A
Endress+Hauser 15
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option
of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available. The features have a 2-digit
structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists
of a number or a letter (e.g. J = Test, Certificate). The second digit constitutes the value that stands
for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate).
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous
locations.
Extended order code: Micropilot
Device type
FMR67
Basic specifications
Position 1, 2 (Approval)
Selected option Description
FMR67 BF
1)
ATEX II 1/2 D Ex ta/tb IIIC T85°C Da/Db
IF
2)
IECEx Ex ta/tb IIIC T85°C Da/Db
1) The designation changes in connection with Position 4 (Display, Operation) = L or M:
II 1/2 D Ex ta/tb [ia Da] IIIC T85°C Da/Db
2)
The designation changes in connection with Position 4 (Display, Operation) = L or M:
Ex ta/tb [ia Da] IIIC T85°C Da/Db
Position 3 (Power Supply, Output)
Selected option Description
FMR67 A 2-wire, 4-20 mA HART
B 2-wire, 4-20 mA HART, switch output (PFS)
C 2-wire, 4-20 mA HART, 4 to 20 mA
K 4-wire, 90-253 VAC; 4-20 mA HART
L 4-wire, 10,4-48 VDC; 4-20 mA HART
Position 4 (Display, Operation)
Selected option Description
FMR67 A Without, via communication
C SD02, 4-line, push buttons + data backup function
E SD03, 4-line, illum., touch control + data backup function
L
1)
Prepared for display FHX50 + M12 connection
M
1)
Prepared for display FHX50 + custom connection
1) FHX50 is approved according to DEK12.0046X or DEKRA 12ATEX0151X.