Micropilot FMR67B PROFINET with Ethernet-APL
Endress+Hauser 41
UNI flange 10"/DN250/250A for antennas with alignment unit
12×30°
30°
(=360°)
!358 (14.1)
!405 (15.9)
!26 (1.02)
22 (0.87)
10 (0.39)
!95.2 (3.75)
A0048841
46 Dimensions of UNI flange 10"/DN250/250A for antennas with alignment unit. Unit of
measurement mm (in)
UNI flange 10"/DN250/250A
Suitable for ASME B16.5, 10" 150lbs / EN1092-1; DN250 PN16 / JIS B2220; 10K 250A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
4.7 kg (10.36 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.
To Next Page
Loading...
