Endress+Hauser Micropilot FMR67B - Startup Configuration and System Redundancy

Micropilot FMR67B PROFINET with Ethernet-APL
Endress+Hauser 45
Antenna flush mount, PTFE, 80 mm (3 in), with UNI flange and purge air connection
R
L2
L1
L3
L4
!50 (1.97)
A
B
1
1
13.5 (0.53)
A0046490
 52 Dimensions of antenna flush mount, PTFE, 80 mm (3 in), with UNI flange and purge air connection. Unit
of measurement mm (in)
A Process temperature version ≤150 °C (302 °F)
B Process temperature version ≤200 °C (392 °F)
R Reference point of measurement
1 Bottom edge of housing
L1 158 mm (6.22 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 137 mm (5.39 in); version with Ex d or XP approval +5 mm (+0.20 in)
L3 149 mm (5.87 in); version with Ex d or XP approval +5 mm (+0.20 in)
L4 170 mm (6.69 in); version with Ex d or XP approval +5 mm (+0.20 in)
UNI flange 8"/DN200/200A for antenna flush mount, PTFE, 80 mm (3 in), purge air connection
!340 (13.4)
4×90°
6×60°
!26 (1.02)
!26 (1.02)
!294.5 (11.6)
!80.3 (3.16)
8 (0.31)
A0048820
 53 Dimensions of UNI flange 8"/DN200/200A for DN80 antenna with purge air connection. Unit of
measurement mm (in)