Endress+Hauser Micropilot FMR67B - Device Information; 11.10 Firmware History

Micropilot FMR67B PROFINET with Ethernet-APL Diagnostics and troubleshooting
Endress+Hauser 61
Resetting the device to the factory setting
12 s
50 ms
I
Display
onoff
I
A0050015
 25 Sequence - Factory setting
Reset the device to the factory setting
‣
Press operating key I for at least 12 s.
 Device data are reset to the factory setting, the LED flashes briefly.
11.9 Device information
All device information is contained in the Information submenu.
Navigation: System → Information
For detailed information on the Information submenu: Description of device
parameters.
11.10 Firmware history
The firmware version can explicitly be ordered via the product structure. This makes it
possible to ensure the compatibility of the firmware version with an existing or
planned system integration.
Version
01.00.00
• Initial software
• Valid from: 01.05.2023