Endress+Hauser Nivector FTI26 - Page 13

Nivector FTI26 Installation
Endress+Hauser 13
Installation with protector
• Protection of point level switch against damage by particularly abrasive or coarse product
• Outflow protection in silo for functional testing when silo is full
≥20 (0.8)
G 1½"
A0036361
 8 Installation with protector, can be ordered as an accessory →  22
Take account of metallic or non-metallic vessels in accordance with EMC guidelines,
see Technical Information TI01384F.
5.2.3 Protection cover for hazardous areas
L
WARNING
Damage to the device from impact.
‣
The protection cover must be fitted before the device is put into operation.
A
0.6 Nm
A0035999
A View with ground terminal
Can also be ordered as an accessory →  22
≥20 (0.8)
G 1"
A0036433
 9 Installation with protection cover, included in scope of delivery for hazardous areas or can be ordered as
an accessory →  22