Endress+Hauser NRF81 - Page 128

Operating menu Tankside Monitor NRF81
128 Endress+Hauser
#blank# (HART SV - designation dependent on device)
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ #blank#
Prerequisite For HART devices other than NMT: Operating mode (→  127) = PV,SV,TV & QV
Description Shows the second HART variable (SV).
Additional information
Read access Operator
Write access -
#blank# (HART TV - designation dependent on device)
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ #blank#
Prerequisite For HART devices other than NMT: Operating mode (→  127) = PV,SV,TV & QV
Description Shows the third HART variable (TV).
Additional information
Read access Operator
Write access -
#blank# (HART QV - designation dependent on device)
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ #blank#
Prerequisite For HART devices other than NMT: Operating mode (→  127) = PV,SV,TV & QV
Description Shows the fourth HART variable (QV).
Additional information
Read access Operator
Write access -
Output pressure 
Navigation  Setup → Advanced setup → Input/output → HART devices → HART Device(s)
→ Output pressure
Prerequisite Not available for Micropilot S FMR5xx and Prothermo 53x. (In these cases the measured
variables are allocated automatically).