Endress+Hauser NRF81 - Page 164

Operating menu Tankside Monitor NRF81
164 Endress+Hauser
Additional information
Read access Operator
Write access Maintenance
The Measured level option doesn't contain a unit. If a unit is needed, select the Tank
level option.
0 % value 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration → 0 %
value
Prerequisite PV source = Custom
Description 0% value of the primary variable (PV).
User entry Signed floating-point number
Factory setting 0 mm
Additional information
Read access Operator
Write access Maintenance
100 % value 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration
→ 100 % value
Prerequisite PV source = Custom
Description 100% value of the primary variable (PV).
User entry Signed floating-point number
Factory setting 0 mm
Additional information
Read access Operator
Write access Maintenance
PV mA selector 
Navigation  Setup → Advanced setup → Communication → HART output → Configuration → PV
mA selector
Prerequisite PV source = Custom