Endress+Hauser NRF81 - Page 184

Operating menu Tankside Monitor NRF81
184 Endress+Hauser
Factory setting 0 bar
Additional information
Read access Operator
Write access Maintenance
P2 offset 
Navigation  Setup → Advanced setup → Application → Tank configuration → Pressure → P2
offset
Description Defines the offset for the middle pressure (P2). The offset is added to the measured
pressure prior to any tank calculation.
User entry –25 to 2.5 bar
Factory setting 0 bar
Additional information
Read access Operator
Write access Maintenance
P1-2 distance 
Navigation  Setup → Advanced setup → Application → Tank configuration → Pressure → P1-2
distance
Description Defines the distance between the bottom and the middle pressure transmitter.
User entry 0 to 100 000 mm
Factory setting 2 000 mm
Additional information
Read access Operator
Write access Maintenance
P2 absolute / gauge 
Navigation  Setup → Advanced setup → Application → Tank configuration → Pressure → P2
absolute / gauge
Description Defines whether the connected pressure transmitter measures an absolute or a gauge
pressure.
Selection • Absolute
• Gauge