Endress+Hauser Proline Promag 300 - Manufacturer Contact Address; Extended Order Code

Proline Promag 300 XA01514D
Endress+Hauser 7
Affixing the certificate number certifies conformity with the standards
under www.IECEx.com (depending on the device version).
• IEC 60079-0: 2011
• IEC 60079-7: 2015
• IEC 60079-11: 2011
• IEC 60079-15: 2010
Manufacturer
contact address
Endress+Hauser Flowtec AG
Kägenstrasse 7
4153 Reinach BL
Switzerland
Extended order
code
The extended order code is indicated on the nameplate, which is affixed
to the device in such a way that it is clearly visible. Additional
information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
* * * * * * _ * * * * * … * * * * * + A*B*C*D*E*F*G*…
Device type Basic specifications Optional specifications
* = Spaceholder: At this position, an option (number or letter) selected from
the specification is displayed instead of the placeholders.
• Device type
The device and the device design is defined in the "Device type" section
(Product root).
• Basic specifications
The features that are absolutely essential for the device (mandatory
features) are specified in the basic specifications. The number of
positions depends on the number of features available. The selected
option of a feature can consist of several positions.
• Optional specifications
The optional specifications describe additional features for the device
(optional features). The number of positions depends on the number
of features available. The features have a 2-digit structure to aid
identification (e.g. JA). The first digit (ID) stands for the feature
group and consists of a number or a letter (e.g. J = test, certificate).
The second digit constitutes the value that stands for the feature
within the group (e.g. A = 3.1 material (wetted parts), inspection
certificate).