Endress+Hauser Proline Promag 50P - Page 24

Proline Promag 50P, 53P
24 Endress+Hauser
Measuring tube specifications
Mechanical construction
Design / dimensions Dimensions: Wall-mount housing (non hazardous area and II3G / zone 2)
Nominal diameter Pressure rating Inside diameter of
measuring tube
[mm] [inch]
EN (DIN)
[bar]
AS 2129 AS 4087 ANSI
[lbs]
JIS with PFA
inches (mm)
with PTFE
inches (mm)
15 1/2" PN 40 −−Cl 150 20K − 0.59 (15)
25 1" PN 40 Table E − Cl 150 20K 0.91 (23) 1.02 (26)
32 − PN 40 −−−20K 1.26 (32) 1.38 (35)
40 1 1/2" PN 40 −−Cl 150 20K 1.42 (36) 1.61 (41)
50 2" PN 40 Table E Cl.14 Cl 150 10K 1.89 (48) 2.05 (52)
65 − PN 16 −−−10K 2.48 (63) 2.64 (67)
80 3" PN 16 −−Cl 150 10K 2.95 (75) 3.15 (80)
100 4" PN 16 −−Cl 150 10K 3.98 (101) 4.09 (104)
125 − PN 16 −−−10K 4.96 (126) 5.08 (129)
150 6" PN 16 −−Cl 150 10K 6.06 (154) 6.14 (156)
200 8" PN 10 −−Cl 150 10K 7.91 (201) 7.95 (202)
250 10" PN 10 −−Cl 150 10K − 10.1 (256)
300 12" PN 10 −−Cl 150 10K − 12.0 (306)
350 14" PN 10 −−Cl 150 −−13.3 (337)
400 16" PN 10 −−Cl 150 −−15.2 (387)
450 18" PN 10 −−Cl 150 −−17.0 (432)
500 20" PN 10 −−Cl 150 −−19.2 (487)
600 24" PN 10 −−Cl 150 −−23.3 (593)