Endress+Hauser Proline Promag 50P - Page 27

Proline Promag 50P, 53P
Endress+Hauser 27
Compact version ≤ 12" (DN ≤ 300)
F06-53Fxxxxx-06-00-xx-xx-000
High temperature version ≤ 12" (DN ≤ 300)
F06-5xPxxxxx-06-00-00-xx-000
Measurement A1, B1 = Measurement A, B of the standard compact version plus 4.33" (110 mm)
DN L A B C K E
EN (DIN) / JIS /
AS*
[mm]
ANSI
[inch]
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
15 1/2" 7.87 (200) 13.3 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.7 (94)
25 1" 7.87 (200) 13.3 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.7 (94)
32 − 7.87 (200) 13.3 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.7 (94)
40 1 1/2" 7.87 (200) 13.3 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.7 (94)
50 2" 7.87 (200) 13.3 (341) 10.1 (257) 3.31 (84) 4.72 (120) 3.7 (94)
65 − 7.87 (200) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.7 (94)
80 3" 7.87 (200) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.7 (94)
100 4" 9.84 (250) 15.4 (391) 11.1 (282) 4.29 (109) 7.08 (180) 3.7 (94)
125 − 9.84 (250) 18.6 (472) 12.7 (322) 5.90 (150) 10.2 (260) 5.51 (140)
150 6" 11.8 (300) 18.6 (472) 12.7 (322) 5.90 (150) 10.2 (260) 5.51 (140)
200 8" 13.8 (350) 20.7 (527) 13.6 (347) 7.08 (180) 12.7 (324) 6.14 (156)
250 10" 17.7 (450) 22.7 (577) 14.6 (372) 8.07 (205) 15.7 (400) 6.14 (156)
300 12" 19.7 (500) 24.7 (627) 15.6 (397) 9.05 (230) 18.1 (460) 6.53 (166)
The fitting length (L) is always the same, regardless of the pressure rating.
* Only DN 25 and 50 are available if flanges according to AS are used.
8.94"
(227)
7.68"
(195)
6.61"
(168)
6.30"
(160)
8.15" *
(207)
K
E
L (DVGW)
A
C
B
Esc
E
- +
4.33"
(110)
A1
B1
Esc
E
- +