Endress+Hauser Proline Promag 50P - Page 28

Proline Promag 50P, 53P
28 Endress+Hauser
Remote version ≤ 12" (DN ≤ 300)
A0003219
High-temperature version ≤ 12" (DN ≤ 300)
F06-xxPxxxxx-06-05-00-xx-000
Measurement A1, B1 = Measurement A, B of the standard compact version plus 4.33" (110 mm)
DN L A B C K E
EN (DIN) / JIS /
AS*
[mm]
ANSI
[inch]
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
inches
(mm)
15 1/2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.7 (94)
25 1" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.7 (94)
32 − 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.7 (94)
40 1 1/2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.7 (94)
50 2" 7.87 (200) 11.2 (286) 7.95 (202) 3.31 (84) 4.72 (120) 3.7 (94)
65 − 7.87 (200) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.7 (94)
80 3" 7.87 (200) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.7 (94)
100 4" 9.84 (250) 13.2 (336) 8.94 (227) 4.29 (109) 7.08 (180) 3.7 (94)
125 − 9.84 (250) 16.4 (417) 10.5 (267) 5.90 (150) 10.2 (260) 5.51 (140)
150 6" 11.8 (300) 16.4 (417) 10.5 (267) 5.90 (150) 10.2 (260) 5.51 (140)
200 8" 13.8 (350) 18.6 (472) 11.5 (292) 7.08 (180) 12.7 (324) 6.14 (156)
250 10" 17.7 (450) 20.5 (522) 12.5 (317) 8.07 (205) 15.7 (400) 6.14 (156)
300 12" 19.7 (500) 22.5 (572) 13.5 (342) 9.05 (230) 18.1 (460) 6.53 (166)
The fitting length (L) is always the same, regardless of the pressure rating.
* Only DN 25 and 50 are available if flanges according to AS are used.
E
L
A
C
B
K
6.73"
(171)
5.63"
(143)
4.01"
(102)
5.08"
(129)
4.33"
(110)
A1
B1