Endress+Hauser Proline Prosonic Flow P 500 - Page 32

Use in protective systems Proline Prosonic Flow P 500 HART
32 Endress+Hauser
Current output value 
Navigation  Diagnostics → Simulation → Current output value (0355)
Prerequisite In the Current output 1 to n simulation parameter, the On option
is selected.
Description Use this function to enter a current value for the simulation. In this
way, users can verify the correct adjustment of the current output
and the correct function of downstream switching units.
User entry • 1. Default value: Select 4.0 mA.
• 2. Default value: Select 20.0 mA.
or
3.59 to 22.5 mA
Additional
information
Dependency
The input range is dependent on the option selected in the Current
span parameter.