Endress+Hauser Proline Prosonic Flow P 500 - Safety Instructions; Personnel Requirements for Safe Operation; Intended Use and Operational Safety

Proline Prosonic Flow P 500 HART Permitted device types
Endress+Hauser 9
Measuring device Documentation code
Prosonic Flow P 500 BA02025D
3 Permitted device types
The details pertaining to functional safety in this manual relate to the device versions listed
below and are valid as of the specified software and hardware versions. Unless otherwise
specified, all subsequent versions can also be used for safety functions. A modification process
according to IEC 61508 is applied for any device modifications.
Feature Designation Option selected
– Order code 9P5B (Prosonic Flow P 500)
000 Mounting type All
010 Approval; transmitter; sensor All
015 Power supply All
020 Output; input 1
1)
• Option BA "4-20mA HART"
• Option CA "4-20mA HART Ex-i passive"
• Option CC "4-20mA HART Ex-i active"
021 Output; input 2 All
022 Output; input 3 All
030 Display; Operation All
035 Integrated ISEM electronics All
041 Transmitter housing All
050 Electrical connection All
060 sensor version All
065 Process temperature All
066 Cables All
070 Installation set All
480 Device model All
500 Display operating language All
520 Sensor option All
530 Customer-specific configuration All
540 Application package All
570 Service All
580 Test, certificate All
590 Additional approval LA (= SIL)
2)