Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os
Application
• The measuring principle is non-invasive and independent of
pressure, density and conductivity
• Bidirectional measurement of various fluids, e.g. liquid
hydrocarbons and chemicals
Device properties
• Direct mounting, independent of process temperature
• Wide nominal diameter range: DN 15 to 4000 (½ to 160")
• Medium temperature: –40 to +550 °C (–40 to +1 022 °F)
• Remote version with up to 3 I/Os
• Backlit display with touch control and WLAN access
• Standard volume correction and product identification for
liquid hydrocarbons
Your benefits
• Constant accuracy even when mounted with short inlet run
thanks to FlowDC
• High safety standards – SIL by design, international
hazardous area approvals
• Long-term stable signal – maintenance-free permanent
mounting from outside with coupling pads
• Reliable measurement on various pipe materials – sensor for
GRP and plastic pipes available
• Full access to process and diagnostic information –
numerous, freely combinable I/Os
• Reduced complexity and variety – freely configurable I/O
functionality
• Integrated verification – Heartbeat Technology
Products Solutions Services
Technical Information
Proline Prosonic Flow P 500
Ultrasonic time-of-flight flowmeter
TI01504D/06/EN/02.24-00
71633387
2024-01-31
To Next Page
