Proline Prosonic Flow P 500
72 Endress+Hauser
Coupling pads
• –40 to +100 °C (–40 to +212 °F): silicon-based thermal pad H48.2 (0.5 mm (0.02 in))
• –40 to +170 °C (–40 to +338 °F): VMQ-silicone-rubber (vinyl methyl silicone) (0.5 mm (0.02 in))
Coupling foil
• 150 to 220 °C (302 to 428 °F): tin
• 210 to 370 °C (410 to 698 °F): zinc
• 350 to 550 °C (662 to 1 022 °F): aluminum
Coupling paste
Coupling grease
Accessories
Protective cover
Stainless steel, 1.4404 (316L)
External WLAN antenna
• Antenna: ASA plastic (acrylonitrile styrene acrylate) and nickel-plated brass
• Adapter: Stainless steel and nickel-plated brass
• Cable: Polyethylene
• Plug: Nickel-plated brass
• Angle bracket: Stainless steel
Display and user interface
Operation concept
Operator-oriented menu structure for user-specific tasks
• Commissioning
• Operation
• Diagnosis
• Expert level
Quick and safe commissioning
• Guided menus ("Make-it-run" wizards) for applications
• Menu guidance with brief descriptions of the individual parameter functions
• Access to the device via web server
• WLAN access to the device via mobile handheld terminal, tablet or smart phone
Reliable operation
• Operation in local language
• Uniform operating philosophy applied to device and operating tools
• If replacing electronic modules, transfer the device configuration via the integrated memory
(HistoROM backup) which contains the process and measuring device data and the event logbook.
No need to reconfigure.
Efficient diagnostics increase measurement reliability
• Troubleshooting measures can be called up via the device and in the operating tools
• Diverse simulation options, logbook for events that occur and optional line recorder functions
Installation quality
To optimize the sensor mounting positions, real-time display of:
• Installation status (good, bad, acceptable)
• Signal strength
• Signal to noise ratio
• Sound velocity
To Next Page
Loading...
