Endress+Hauser Proline Prosonic Flow P 500 - Service Interface

Proline Prosonic Flow P 500
Endress+Hauser 75
1 2
3
A0029437
 73 Options for remote operation via Modbus RS485 protocol (active)
1 Control system (e.g. PLC)
2 Computer with web browser (e.g. Microsoft Edge) to access the integrated device web server or with operating
tool (e.g. FieldCare, DeviceCare) with COM DTM "CDI Communication TCP/IP" or Modbus DTM
3 Transmitter
Service interface Via service interface (CDI-RJ45)
A point-to-point connection can be established to configure the device on site. With the housing
open, the connection is established directly via the service interface (CDI-RJ45) of the device.
An adapter for the RJ45 to the M12 plug is optionally available for the non-hazardous area:
Order code for "Accessories", option NB: "Adapter RJ45 M12 (service interface)"
The adapter connects the service interface (CDI-RJ45) to an M12 plug mounted in the cable
entry. The connection to the service interface can be established via an M12 plug without
opening the device.
Proline 500 transmitter
2
3
1
A0027563
 74 Connection via service interface (CDI-RJ45)
1 Computer with web browser (e.g. Microsoft Internet Explorer, Microsoft Edge) to access the integrated web
server or with an operating tool "FieldCare", "DeviceCare" with COM DTM "CDI Communication TCP/IP" or
Modbus DTM
2 Standard Ethernet connecting cable with RJ45 plug
3 Service interface (CDI-RJ45) of the measuring device with access to the integrated web server
Via WLAN interface
The optional WLAN interface is available on the following device version:
Order code for "Display; operation", option G "4-line, illuminated; touch control + WLAN"