EasyManua.ls Logo

Endress+Hauser Proline Prosonic Flow P 500 - Accessories; Device-Specific Accessories

Endress+Hauser Proline Prosonic Flow P 500
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Proline Prosonic Flow P 500
Endress+Hauser 83
The most important parameters for the Oil & Gas Industry can be calculated and displayed with this
application package. It is also possible to identify the product based on the sound velocity or the
reference density.
Corrected volume flow and calculated reference density in accordance with the "API Manual of
Petroleum Measurement Standards, Chapter 11.1"
A temperature measurement is required to calculate the corrected volume. The measured values
can be read in via the 4-20 mA input on the device, for example.
As a temperature measuring device, the resistance thermometer TST602 is recommended. TMT82
is recommended for use in hazardous areas.
For detailed information, see the Special Documentation for the device. →  87.
Accessories
Various accessories, which can be ordered with the device or subsequently from Endress+Hauser, are
available for the device. Detailed information on the order code in question is available from your
local Endress+Hauser sales center or on the product page of the Endress+Hauser website:
www.endress.com.
Device-specific accessories For the transmitter
Accessories Description
Transmitter
Proline 500
Transmitter for replacement or storage. Use the order code to define the following
specifications:
Approvals
Output
Input
Display/operation
Housing
Software
Proline 500 transmitter:
Order number: 9X5BXX-*********B
Proline 500 transmitter for replacement:
It is essential to specify the serial number of the current transmitter when
ordering. On the basis of the serial number, the device-specific data of the
replaced device can be used for the new transmitter.
Proline 500 transmitter: Installation Instructions EA01152D
External WLAN antenna External WLAN antenna with 1.5 m (59.1 in) connecting cable and two angle
brackets. Order code for "Accessory enclosed", option P8 "Wireless antenna wide
area".
The external WLAN antenna is not suitable for use in hygienic
applications.
Additional information regarding the WLAN interface →  75.
Order number: 71351317
Installation Instructions EA01238D
Pipe mounting set Pipe mounting set for transmitter.
Installation Instructions EA01195D
Proline 500 transmitter
Order number: 71346428

Table of Contents

Other manuals for Endress+Hauser Proline Prosonic Flow P 500

Related product manuals